fbpx

1. Pairing the Watch

1. Sign up for a subscription at BellPal.com/us.
2. Open the BellPal USA App.
3. Press “I have a BellPal Watch” on the main screen.
4. Type in your phone number. This must match the phone number of the subscription.
5. You will be sent a four digit verification code via SMS. Type it into continue.
6. Verify your name and phone number. Hit “Apply” to continue.
7. Review and agree to the “Terms and Conditions” to continue.
8. Press the “Start Pairing” button.
9. Hold the alarm button on the watch for 2-3 seconds until the Blue LED blinks.
10. Click “Pair” on the “Bluetooth Pairing Request” popup.
11. If the pairing is successful, click “Explore” to continue into the App.


2. Adding a Follower

1. Go to the “Followers” tab of the BellPal USA app.
2. Click the “+” on the top right.
3. Fill in the follower Name, Relationship, and Phone Number (this must be a mobile number).
4. Click “Done” and then “Apply” to send the invitation.
5. The follower will be added once they accept the invitation via their copy of the BellPal USA app.
They should receive an SMS notifying them of the invite and prompting them to download the
app.


3. Accepting a Follower Invitation

1. Download and install the BellPal USA app.
2. Type in your phone number. This must match the phone number that was invited to be a
follower.
3. You will be sent a four digit verification code via SMS. Type it into continue.
4. Enter your name and verify your phone number. Click “Done” then “Apply” to continue.
5. Review and agree to the “Terms and Conditions” to continue.
6. Click “Explore” to continue into the app.
7. Go to the “Following” tab in the app.
8. Click the invitation and select “Activate” at the bottom to accept and follow them.


4. Updating the BellPal Watch

1. Go to the “Settings” tab inside the BellPal USA app.
2. Select “BellPal Watch Update” from the “Advanced settings” section.
3. Wait for the update to complete.
4. If the update succeeds, click “OK” on the popup to continue.
5. Your BellPal Watch will reconnect to the app after a few seconds.


5. How to Remove a BellPal Watch from the USA App

1. Go to the “Settings” tab inside the BellPal USA app.
2. Select “My BellPal Watch” from the menu list.
3. Select the “Unpair Watch” button.
4. Select “OK” on the popup.
5. Read the next steps and click “OK” to continue.
6. Reset the Watch by holding the alarm button for 30 seconds or until the green light turns off.
7. Open your phone settings.
8. Go to “Bluetooth” in the main menu.
9. Find the “BellPal Watch One” device in the list and click the “i” button next to it.
10. Click “Forget this Device” and confirm the selection.

Watch Overview

Watch Parts

  1. Alarm button
  2. LED light
  3. Crown
  4. Integrated strap opener

Flashing Blue — Pairing mode

When the blue light is flashing, the watch can be paired with the BellPal USA app on your mobile phone.

 

Flashing Red-Blue

Connection problems — If the watch loses its connection to your mobile phone, an alternate red and blue light will flash. It will stop automatically when the connection is re-established. You can hide the flashing light by pressing the alarm button once.

 

Yellow Markings 01
Pair Watch
Pair Watch

Flashing Red — Alarm Triggered

A flashing red light indicates that an alarm signal has been registered by the watch, either through the automatic fall detection, or because you have pressed the alarm button

Flashing Green — Alarm Signal Received

A flashing green light indicates that the alarm signal has been received, either by one of your followers or by our Professional Monitoring Center (subscription service).

Red Light
10 seconds

Still Have Questions?

Give us a call!  📞 800-300-1724